How To Maintain Your Whirlpool Bath

Q: How do I maintain my Watertech Whirlpool bath?

A: This is one of the more common questions asked of us at Home Shows (tip: 4/27/98).

Although all Watertech whirlpool baths are 100% self draining, you should periodically clean and disinfect the inner walls of the pipe system with dishwasher detergent (granular, one cup), household bleach (one cup) or white vinegar (one cup). Just fill your tub with water over the jets and pour one of the aforementioned products in the tub. Turn the system on and allow it to run for five minutes. Turn the system off and let the solution soak for at least 20 minutes. But, before draining, run the system again after soaking for another 5-10 minutes. Drain the bath completely, refill with cold water, turn the system on and allow the water to rinse the system, then drain.

By doing this every 1-2 months, your whirlpool system will remain free of any soap or oil buildups. And remember, with a Watertech whirlpool bath you CAN use bath oils, bubble baths and other bathing accessories because our tubs are 100% self draining and hold no water in the system after you shut the system off and drain.

If you have any questions about maintenance of your whirlpool, give us a call at 1-800-289-8827, Monday-Friday, 8 a.m.-5 p.m. and Saturdays from 8 a.m.-Noon.

Thanks for shopping Watertech!

Copyright © 2008, HOMETECH INDUSTRIES GROUP. All Rights Reserved.
Hometech produces quality products under the tradenames WATERTECH Whirlpool Baths,
Spas and Accessories and WEATHERGUARD Steel Structures, Car and Patio Covers.

Web design by Addweb Marketing